You are signed in to your Facebook account. Share this photo by posting it on your wall, or by choosing a friend below and posting it on their wall. (one friend at a time)
You are signed in to your Facebook account. Share this photo by posting it on your wall, or by choosing a friend below and posting it on their wall. (one friend at a time)
you can see all the staples that I used. every 1/4" really. The microfibre was quite susceptible to ripping so have ot use alot of staples. I used a brad nailer with 3/4" staples, 1/4" crown. Had to crank down the air pressure as it was punching right through the material. Only used about 80 PSI and that seemed to allow the staples to hold and not punch all the way through into the wood.
1 comment
you can see all the staples that I used. every 1/4" really. The microfibre was quite susceptible to ripping so have ot use alot of staples. I used a brad nailer with 3/4" staples, 1/4" crown. Had to crank down the air pressure as it was punching right through the material. Only used about 80 PSI and that seemed to allow the staples to hold and not punch all the way through into the wood.
said customstar00
To be able to leave a comment please Log in or Sign up.