Modifed Tongue Jack
NCCamper > albums > Hitching, Lifting, and Leveling
Album Info:
I removed the stock tongue jack handle and replaced it with this. It is a 3" section of 1/2" electrical conduit with a 1 1/2 inch bolt in one end, a washer on each end and filled with JB Weld. The upper washer holds the socket or wrench in place. The lower washer rides on the top of the jack. It is all held in place with a clip using the original tounge jack stem. The clip allows me to easily remove the bolt and put the original crank handle back on.
Sample Email
Below is what we'll send to your friends to invite them - edit or remove the optional note.
No comments so far...
To be able to leave a comment please Log in or Sign up.