sand casting a bowl
dena6355 (Premium member) > albums > behind the Fence w/concrete
Album Info:
Apply a mix of 1 part cement 2 parts perlite or vermiculite and 2 parts sand with a bit of fibers mixed in with water to a tooth paste consistency. Begin at the bottom near the rim of the plant tray with a handful of mix, that you have gently tossed into a gelled oval shape. Pat this firmly into the sand, and continue around the edge. I have the tray on a board atop a lazy susan to allow for me to turn the bowl. Attach legs and draw a design. Keep bowl damp for about 24-48hours. Then unmold.....July 2003
Sample Email
Below is what we'll send to your friends to invite them - edit or remove the optional note.
No comments so far...
To be able to leave a comment please Log in or Sign up.